Foy Insurance

  • JUser: :_load: Unable to load user with ID: 43
Tuesday, 13 January 2015 16:55

Freezing and Bursting Pipes

Submitted by 
Rate this item
(0 votes)

How pipes freeze and burst, and what to do to prevent damage - from the Insurance Institute for Business and Home Safety

When water freezes, it expands.  That's why a can of soda explodes if it's put into a freezer to chill quickly and forgotten.  When water freezes in a pipe, it expands the same way.  If it expands enough, the pipe bursts, water escapes and serious damage results.


Surprisingly, ice forming in a pipe does not typically cause a break where the ice blockage occurs. It’s not the radial expansion of ice against the wall of the pipe that causes the break. Rather, following a complete ice blockage in a pipe, continued freezing and expansion inside the pipe causes water pressure to increase downstream -- between the ice blockage and a closed faucet at the end. It’s this increase in water pressure that leads to pipe failure. Usually the pipe bursts where little or no ice has formed. Upstream from the ice blockage the water can always retreat back towards its source, so there is no pressure build-up to cause a break. Water has to freeze for ice blockages to occur. Pipes that are adequately protected along their entire length by placement within the building’s insulation, insulation on the pipe itself, or heating, are safe.


Generally houses in northern climates are built with the water pipes located on the inside of the building insulation, which protects pipes from subfreezing weather. However, extremely cold weather and holes in the building that allow a flow of air to come into contact with pipes can lead to freezing and bursting.  Read entire guide here




Read 3989 times Last modified on Tuesday, 13 January 2015 17:43

Contact us

Foy Insurance has locations throughout New England to serve you.

  • Branch Locator

Connect with us

You are here: Home Blog & Social Media Blog Categories Insurance Products Freezing and Bursting Pipes